Adding Connections/Edge

On the top menu, click in "Add Edge" The window "Add Edge" will appear with the options:

• Select Source Parent: the parent node that contains the source port to be connected

• Select Source Child: the source port that will be connected

• IP Address: IP address in the CIDR format (10.0.0.0/24) for the source. For more information about the CIDR format consult https://www.ipaddressguide.com/cidr

• MAC Address: MAC address to the ethernet interface for the source

• Select Target Parent: the parent node that contains the target port to be connected

• Select Target Child: the target port that will be connected

• IP Address: IP address in the CIDR format (10.0.0.0/24) for the target . For more information about the CIDR format consult https://www.ipaddressguide.com/cidr

• MAC Address: MAC address to the ethernet interface for the target

The checkbox "Define bandwidth and delay" will allow the configuration of "Bandwidth" and "Delay" fields.

• Bandwidth: defines the throughput of the switch interface. The unit must be provided (kbit, mbit) without spaces (i.e. 50kbit). The maximum capacity will vary depending on your current machine's capabilities. If no value is passed this option will not be set.

• Delay: define the delay at the switch interface. If no value is provided, the additional delay value is 0

Note: Please be advised that the present version does not include the validation feature for IP and MAC addresses. Should you encounter any issues, we recommend loading your topology and verifying the addresses manually. We acknowledge the importance of this feature and are committed to incorporating it in the upcoming version of the software.